Description
Designed for use with Adams Rite deadlatches or cylindrical locksets with 1/2″ [12.7 mm] to 5/8″ [15.9 mm] latchbolt projection. For use in aluminum, hollow metal, or wood applications.
Function:
Remote electrical control of any door equipped with an Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical lockset with 1/2″ [12.7 mm] to 5/8″[15.9 mm] latchbolt projection. Electrical actuation unlocks the keeper, releasing the latchbolt so the door may be opened without operating the latch itself.
Certifications:
UL 1034 burglary-resistant listed
UL 294 (6th Edition) listed
Features:
Case: 1″ x 3-3/8″ x 1-5/8″ deep [25.4 mm x 85.7 mm x 41.3 mm deep].
Strike Opening: 5/8″ x 1-7/16″ x 1/2″ deep [15.9 mm x 36.5 mm x 12.7 mm deep]. Bolt retaining keeper is stainless steel. Strike accepts bolt of any Adams Rite 4500, 4700 (discontinued), or 4900 Deadlatch or cylindrical latches.
Strike Lip: Basic strike has lip of proper length for 1-3/4″ [44.5 mm] thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available, specified by last dash number.
• Lip extension kits not available on 7101 or 7131.
Latchbolt Projection: 1/2″ to 5/8″ [12.7 mm to 15.9 mm]
Faceplate: Available in a variety of architectural finishes.
| 7100 | 1-1/4″ x 4-7/8″[31.8 mm x123.8 mm] | Flat with radius corners |
| 7101 | 1-1/4″ x 4-7/8″[31.8 mm x123.8 mm] | Radiused to match noseon inactive leaf in a pairof narrow stile doors. |
| 7110 | 1-7/16″ x 7-15/16″[36.5 mm x201.6 mm] | Flat with radius corners |
| 7111 | 1-7/16″ x 10-1/4″[36.5 mm x260.4 mm] | Flat with radius corners |
| 7130 | 1-1/4″ x 6-7/8″[31.8 mm x174.6 mm] | Flat with radius corners |
| 7131 | 1-1/4″ x 6-7/8″[31.8 mm x174.6 mm] | Radiused to match noseon inactive leaf in a pairof narrow stile doors. |
| 7140 | 1-1/4″ x 4-7/8″[31.8 mm x123.8 mm] | Flat with square corners |
7130/7131: Large 6-7/8″ faceplate is designed to cover strike opening when converting from an MS® pivoted-bolt deadlock to deadlatch.
Electrical:
Current Draw:
0.33A at 12 VDC, 1.42A at 12 VAC
0.22A at 16 VDC, 0.63A at 16 VAC
0.17A at 24 VDC, 0.74A at 24 VAC
Voltage: Available in 12, 16, or 24 Volt AC and DC. DC continuous units are silent, AC intermittent units “buzz” on operation.
Fail Safe | Fail Secure: Field selectable at time of installation. However, AC intermittent solenoid must not be used continuously in either.
Options:
• Available with two Form ‘C’ monitoring switches to indicate when the latchbolt is engaged in the strike and whether the strike jaw is blocked. Not available on 7130/7131, 7140.
• Lip extension kits for various dimensions of door centerline to jamb edge; for flat faceplates only. Not available on 7101 or 7131.
Don’t see the finish, or function or specific configuration you need? We can design, configure and build the customizations you are looking for – Just call (800) 776-3247 and our experienced support staff will help you design the systems and products you need.
